How To Fix Write Protected Errors On a USB  Sandisk Pen Drive

Write protected Error in USB Pen drive

in San Disk Cruzer Blade USB Device 8GB

1.the registry under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies.
The value ‘WriteProtect’ should be absent or set to ‘0’.

2.Write protection ON or OFF button on stick then Follow this:-

1. Shutdown your computer or laptop
2. Insert USB Memory Stick into your laptop or Computer
3. Turn on PC and then  start pressing (F8) key then Advanced Boot Options screen will come up
4. Select the Safe Mode with Command Prompt
5. After loading files if your USB Memory Stick drive letter is (G) for example then write as
6. C:\windows\system32>G: and press enter
7. G:\>format G: and press enter
8. If ask you (Y/N) then press (Y) and press enter

3. USB Storage write protection (Fix)
1) Start –> Accessories > Run Command Prompt As Administrator
2) type –> chkdsk t: /F /X
(use your own pen drive letter where f: is)

4. Low Level Formatted software
5. disk getory recover
6. Hard disk washer
7. partition manager
8. Active kill disk
If Write Protected error not solved by this, There is no other any solution for this, this is Hardware Firmware Lock,

Tags : Cannot format USB flash driveHow can I remove "Write Protect" on USB driveHow to remove a write protection from your USB memory StickRemove the write-protectionSandisk write protected errorWrite protected USB

Leave a Response